Vinyl Barriers
Flexible Vinyl Barrier
(Reinforced and Non-Reinforced)Reinforced barrier material contains a fiberglass fabric embedded in vinyl to allow grommets or other mechanical fasteners to be used for hanging or mounting. Non-reinforced barrier material should be applied between building materials such as studs and drywall.
High-Density limp-mass material constructed of non-reinforced high temperature fused vinyl with no lead fillers. Weighs one pound per square foot and is 1/8"
Designed to block transmission of sound through walls, floors and ceilings. Also effective as a pipe and duct wrap to dampen vibrations and reduce noise.
Available in full rolls (54" wide x 60' long ) and may also be purchased by the square foot.
Non-reinforced color is black only.
Material also available in a reinforced version (recommended when product is used as a curtain panel).
Fire Rating: Fire Resistant (Class "A" version also available)
Ship Via: Common Carrier Motor Freight
Sound Transmission Loss (dB) Per Octave Band (Hz)
| 125Hz | 250 Hz | 500 Hz | 1000 Hz | 2000 Hz | 4000 Hz | STC | |
| 1/8" Thick 1 LB/SQ FT | 15 | 19 | 21 | 28 | 33 | 37 | 27 |
- Vinyl noise barrier is tough and durable.
- Will not rot or disintegrate under adverse conditions.
- Easy to install - may be cut with scissors or utility knife.
- Barrier is safe and non-toxic. Contains no asbestos or lead.
Flexible Barricade Noise Barrier
This flexible MLV noise barrier is designed to stop passage of sound through walls, ceilings, and floors. Barriers come in a variety of models and sizes and are ideal for hotels, classrooms, homes, home theaters, music studios, and any area where reduction of noise transmission is necessary. Rolls are 54" wide and wither 30' or 60' long, with STC rating up to 31.
Materials and Sizes
| Thickness | Width | Length | Weight 1 lb./sq.ft. |
|---|---|---|---|
Acoustical Data
Construction
MLV Noise Barrier may be installed in conventional wall construction or in a staggered stud assembly for higher STC results.
Physical Data
| Weight/Sq.Ft. | 1 LB |
| Tensile (Psi) | 762 |
| Gauge (Inches) | .108" |
| Elongation (%) | 200% |
| Die "C" Tear (#In.) | 114 |
| 200 Deg. F/7 Days | No Deformation: <1% Shrink |
| Mil Std. 6411 Burn Test | 9 (Pass) |
| MVS 302 Burn Test | Pass: Self Extinguished |
| STC | 26 |
- Easy to Install
- Use on Walls, Floors and Ceilings
- No Complicated Construction Needed
- Low Cost Solution for Noise Transmission Problems
Availability
Available in rolls 54" x 60' feet long, 270 sq. ft. per roll, with custom lengths available.